RELEASE: WatchMon toolkit 1.0.26

Software 1.0.26 - firmware 1.38

New Features

Hardware Cell Group setup revisited to streamline configuration and suppress less common parameters
- Dialogue to handle Device Sync and monitor outcome and recommend action if required
- Dialogue to handle Network Tester and monitor outcome and recommend action if required
- Cell Monitor poller to select less common modes
- Detect if the CMU device sync task is required
Auto Level Bypass Extra Functionality mode to enable auto levelling of the cell voltage to the same value even when below target bypass voltage.

Extra Status icon for extra bypass re-balancing activity, CMU device re-sync required
Snapshot report on adhoc events to include setup configuration.
Hardware Expansion setup revisited to enable new feature options for 7 input and 10 output functions.
Highlight fault labels for hardware setup related to system, cell group and shunt
Integration setup include CANbus address for
- Base Addr = bms range base / remote and group
- Remote Addr = remote Charger / Inverter range (prior default)
- Group Addr = group range (Master / Slave CMU exchange interfacing).

Cell info caching watchdog from fix reset interval to adjusted interval based on system size.
CellMon device sync function enhancements to handle long chain networks.
Bypass Tester to handle long chain networks.
Shunt nominal capacity increased to 3500Ah.
When saving setup ensure that floating points parameters are verified correctly.
Setup Wizard can
- Handle the no shunt scenario
- Revised defaults for relevant scenarios
- Allow technician authorisation pincode if required.