RELEASE: WatchMon toolkit 1.0.25

Software 1.0.25 - firmware 1.37

Includes both 1.0.25 and 1.0.24

New Features

Wizard setup to auto populate all screens with Hardware / Control defaults settings .
CellMon bypass extra adjustment modes for low volt cutout, footer status icon when re-balancing. New method to check when cells are the same voltage for extended periods (1 min) and not require a shunt. Record recent time stamp events.
Voice Player - configurable telemetry oral speaker for key stats with alternative voices, rate and volume settings, handy when not able to look at the display whilst testing.

Snapshot report now includes extra scheduling options (4hr, 1hr, 15min, 5min), additional fields, also warns if not all the telemetry data has been collected
Include Eltek 2000HE/48 charger to canbus protocol integration.
Main Chart now includes tool tip for cell volt, temperature and bypass amperes.
Redirect Help / Support Icon's to primary website away from zendesk.
Status footer icons to warn if connection version is a mismatch, and re-sequence to improve visibility.
Expansion hardware includes WatchmonCMC template, contactor sensor status and analogue input reading.

Correctly round default targets for Control Critical, Charging and remote screens
Ensure system operating status is not in timeout when there is no shunt
Session History allow direct reference access via GO
Lifetime history reset all counters .
Bypass tester to handle longer cell series network and report overall stats.
Shunt setup - idle Charge / Discharge thresholds can be saved.