TROUBLESHOOTING: Not Authorized To Be In Setup Mode

Troubleshooting  "Not Authorized To Be In Setup Mode"

This message comes based on:

1.  You need to be connected via USB to make changes and if you are connected via Wifi  (this is a security thing and you will need to get the USB out)

2.  Where the Software and Firmware are a mismatch the system will stop you being able to update.  e.g. Running WatchMon5 firmware on a WatchMon4 or newer firmware using old software.

3.  You have an incorrect pincode or entered it incorrectly.  If this is the case please look at the article Troubleshooting PINcode