RELEASE: WatchMon toolkit 2.0.12

Download setup at WatchMonToolkitInstaller_2.0.12g.msi

New Features

• CellMon group "slave mode" functionality, presets, validation, and entire node range verse local range.

Enhancements

• Store / Recover cell metrics for Bypass Session Ah, Lifetime Ah, lifetime Elapsed Hr and Initial Bypass Date.
• Add LeafMon to CellMon types and appropriate defaults.
• Node Chart for Cell voltage to rounded to 2 decimal places to avoid flicker, on telemetry reported to 3 decimal places.
• Op status LED is cleared to amber prior to user restart and critical off event.

Fixes

• CANbus fix RX statistics.
• Node statistics detect missing settings.
• Detect changes to the Bypass Amps.
• Correctly display Input 6 status checkbox on hardware expansion board.

WatchMonPlus WM5 related

• Fix voltage cell filter for 5/6 and 10/11 to prevent flicker from bypass on the adjacent cell.
• Update frequency of bypass temperature readings.
• Network Tester, LED ID, Device Sync and Bypass Tester are disabled.
• Temporarily disabled balancing prior to user restart and critical off event.
• Limited bypass amp to max setup.

Alternative release notes

Previous release (software 2.0.11)
Next release (software 2.0.13)