RELEASE: WatchMon toolkit 1.0.29

Software 1.0.29 - firmware 1.41

New Features

WiFi connectivity
- Allow remote configuration of setup parameters
- Limited mode to avoid broadcasting continuously on network
- Broadcast read only mode (prevents setup by disabling RX)
- Traffic statistics to help debugging.
Quick Session history provide the ability to
- Sliding time window of 17 hour (1 min) and 3.5 days (5 min)
- Default 1 min, with interval options of 30 sec, 1 min, 2 min and 5 min
- Method to collect all internal records and store to file.
Commissioning Checklist on startup to ensure setup steps are completed.

USB connectivity
- Auto scan or specific com port reference
- Allow multiple systems from one computer.
When joining Wireless AP can manually add SSID.
Add statistics for failed authentication events.
Enable auto refresh for shunt metrics / register dialogue screens.
Connectivity to new shunt device for ShuntMon2.
Software updates prevent warns with pre-release versions.
Ability to add customer banner for toolkit
Daily session history to skip blanks from file append and display.

Daily session history
- Resolve bug with extractor via USB (1.0.28)
- Expanded to meet 10 year capacity.
Reset lifetime metrics now also clears shunt metrics.
Properly fetch the charging control parameters for SoC% via wifi.
Time sync attempt if out by more than 2 seconds, checked every 15 minutes.