Sendyne SPF102MOD

The Sendyne SPF102MOD was used with WatchMon1 but Sendyne ceased making this device.  

IF YOU ALREADY HAVE ON IT IS NOT COMPATIBLE WITH LATER WATCHMON

Discontinued: Our supplier has ceased producing this item

The Batrium Shunt is a shunt-based precision current measurement module. The module is designed to achieve an accuracy of ±1.0 % for current measurement over the whole operating temperature range of –40 °C to +125 °C.

Characteristics:

• 100 µOhm shunt
• ± 200 A continuous
• ± 375 A peak
• 150 V voltage measurement

Features: 

• Turnkey solution for use in the field 
• Typically achieves ±1.0 % accuracy of current measurement 
• Accurate voltage measurement with flexible range 
• Accurate temperature measurements 
• Resolves currents from 3 mA to 500A 
• Automotive temperature range of –40 °C to +125 °C 
• Low power consumption 
• Galvanically isolated communication
• Isolated front end for “high” or “low” side current sensing and attenuation of system-induced noise
• Built-in calibration for current measurements
• Built-in compensation for resistance dependence of the shunt on temperature
• Built-in calibration for voltage measurements
• Temperature reporting in degrees Celsius
• Total coulomb counters

Alternate shunts are available for those who wish to measure smaller or higher currents.

Instructions for assembly

Sendyne data sheet showing more information the module 
Sendyne_SFP102MOD_Product_Brief_V1.1.pdf